Q-Logic SN0135524-00 Manual de usuario descargar pdf (Pagina 125)

100

101

Cisco MDS 9000 Series Switches

Zone Configuration

OGIC SWITCH INTEROPERABILITY GUIDE PAGE 113

ERSION 1.0, MARCH 2003

Zone Types

All zone members must be specified by a world wide port name (WWPN) in order to comply with

Fibre Channel standards. Any zone member not specified by WWPN cannot participate in the

fabric. Below are steps to confirm the zone types.

NOTE: A world wide name (WWN) consists of a world wide node name (WWNN) and one or

more WWPNs. For Cisco, references to pwwn refer to the WWPN. For QLogic,

references to WWN refer to the WWPN.

Cisco Fabric Manager

1. Start Cisco Fabric Manager. The Fabric Manager dialog box displays.

2. From the Fabric Manager dialog box left panel, do the following:

a. Select the VSAN/Zone tab.

b. Expand the VSAN to which you plan to connect the E-port.

c. Verify that the zone member names conform to the standards discussed under “Active Zone

Set Names” on page 107 and are unique between the switches.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 319 320

Comentarios a estos manuales

Sin comentarios

Q-Logic SN0135524-00 Manual de usuario Pagina 125

Comentarios a estos manuales